Grade 9 Biology: Microscope Parts

Shared by a Flashcards.gg user · generated with AI · Report this set

This set covers the parts, functions, and usage tips of a compound light microscope for grade 9 students.

50 cards English Level: School Cell biology Published
Tap the card to flip it

Cards · 50

Compound Light Microscope
An instrument using multiple lenses and visible light to magnify small specimens; standard optical tool in Grade 9 biology.
Eyepiece (Ocular Lens)
Located at the top of the body tube; magnifies the image (usually 10x). Look through it with one or both eyes kept relaxed.
Body Tube
Cylindrical tube connecting the eyepiece to the revolving nosepiece; keeps lenses separated at the correct working distance.
Arm
Curved back support connecting the base and tube; hold this firmly with one hand while carrying the microscope.
Base
Heavy bottom support of the microscope; place your other hand underneath it when transporting the instrument.
Revolving Nosepiece
Rotatable disc at the bottom of the body tube holding objective lenses; turn it until the chosen lens clicks into place.
Objective Lenses
Primary magnifying lenses mounted on the nosepiece facing the slide; usually 3 or 4 lenses with varying powers.
Scanning Power Objective (4x)
Shortest objective lens providing 4x magnification; always start focusing on your specimen using this power.
Low Power Objective (10x)
Medium-short objective lens magnifying 10x; useful for finding and centering specimen features.
High Power Objective (40x)
Long objective lens magnifying 40x; use only the fine focus knob to avoid cracking the slide.
Oil Immersion Objective (100x)
Longest lens requiring special immersion oil to reduce light refraction; used mainly for tiny bacteria.
Stage
Flat platform beneath objectives where the slide is set; keep it clean, flat, and dry at all times.
Stage Clips
Metal clips on the stage; hold the glass slide firmly in position during observation.
Stage Aperture
The circular opening in the center of the stage; allows light from below to pass through the specimen.
Coarse Adjustment Knob
Large knob on the arm; rapidly moves the stage up or down. Use only under low or scanning power.
Fine Adjustment Knob
Small knob inside or beside the coarse knob; sharpens focus slightly. Safe to use at high magnification.
Diaphragm (Iris Diaphragm)
Rotating disk or lever under the stage; controls the amount and contrast of light passing into the slide.
Condenser
System of lenses beneath the stage; concentrates and focuses light onto the specimen for bright clarity.
Light Source (Illuminator)
Built-in electric lamp or mirror located on the base; directs light upward through the stage aperture.
Mirror (Substage Mirror)
Double-sided reflector on older microscopes; use the flat side for artificial light and concave for sunlight (never direct sun).
Power Switch
Switch located on the base; turns the electric light source on or off. Turn off before unplugging.
Total Magnification Formula
Calculated by multiplying eyepiece magnification by objective magnification (e.g., 10x ocular * 40x objective = 400x).
Microscope Slide
Thin rectangular piece of transparent glass; holds the biological specimen safely on the stage.
Cover Slip
Small, ultra-thin square of glass or plastic; placed gently over the specimen at an angle to prevent air bubbles.
Wet Mount Preparation
Drop of liquid containing a specimen covered by a slip; prevents drying out and allows living cells to be seen.
Proper Transport Technique
Carry with both hands: one grasping the arm firmly and the other placed under the base for balance.
Lens Paper
Special non-abrasive paper; use exclusively for cleaning optical glass to avoid scratching expensive lenses.
Inverted Image
Image orientation in a compound microscope; appeared upside down and reversed left-to-right.
Field of View
The visible circle of light seen through the eyepiece; decreases in diameter as magnification increases.
Depth of Field
Thickness of the specimen layer in focus; becomes much thinner as you switch to higher magnification.
Working Distance
Distance between the bottom of the objective lens and the slide; decreases dramatically at higher power.
Parfocal
Microscope feature where an image remains nearly in focus when switching from one objective to another.
Resolution (Resolving Power)
The ability to distinguish two separate points as distinct; determines the clarity and detail of an image.
Magnification
The ratio of an image's apparent size to the specimen's actual size; increases visual size of specimens.
Mechanical Stage
Precision gear mechanism on advanced stages; moves the slide smoothly in X and Y directions with control knobs.
Contrast
Difference in brightness between specimen and background; improved by staining cells or adjusting the diaphragm.
Methylene Blue Stain
Common laboratory stain; binds to acidic cell structures like the nucleus, making them clearly visible.
Iodine Solution
Staining chemical used for plant cells; stains starch blue-black and clearly outlines onion epidermal cells.
Initial Focusing Step
Always place the lowest power objective into position first and raise the stage to its highest point safely.
Slide Positioning Tip
Move the slide in the opposite direction you want the image to go due to the inverted optics.
High Power Objective Rule
Never touch the coarse focus knob under 40x or 100x; doing so can crush the slide and crack the lens.
Dim Light Troubleshooting
Check whether the light switch is on, the mirror is angled, and the diaphragm is opened wide.
Dust Prevention
Always cover the microscope with its plastic dust jacket when not in use to keep optics free of grime.
Cord Storage Tip
Wrap the electrical cord neatly around the base or cord holder before returning the unit to its cabinet.
Monocular vs. Binocular
Monocular has one eyepiece tube; binocular has two eyepieces, reducing eye fatigue during long sessions.
Immersion Oil Removal
Wipe oil off the 100x lens immediately after use with clean lens paper to prevent lens glue degradation.
Rack Stop (Safety Stop)
Adjustable bracket that prevents the stage from rising too high and colliding with objective lenses.
Specimen Centering Tip
Always center the target structure before increasing magnification; otherwise, it will exit the field of view.
Storage Objective Position
Store the microscope with the lowest power (scanning) objective clicked in place over the stage.
Storage Stage Position
Lower the stage completely before storing to relieve mechanical tension and avoid lens contact.