Fire Safety Awareness & Enforcement
Shared by a Flashcards.gg user · generated with AI · Report this set
This set covers essential fire safety principles, hazard prevention rules, and emergency enforcement procedures.
Tap the card to flip it
Cards · 52
- Fire Triangle
- The model representing the three essential elements needed to ignite and sustain fire: fuel, oxygen, and heat.
- Fire Tetrahedron
- An updated combustion model adding a fourth element, the uninhibited chemical chain reaction, to heat, fuel, and oxygen.
- Class A Fire
- Fires involving ordinary combustible materials such as wood, paper, cloth, trash, and plastics.
- Class B Fire
- Fires involving flammable or combustible liquids and gases such as gasoline, oil, paint, propane, and solvents.
- Class C Fire
- Fires involving energized electrical equipment such as appliances, wiring, circuit breakers, and machinery.
- Class D Fire
- Fires involving combustible metals such as magnesium, titanium, zirconium, sodium, and potassium.
- Class K Fire
- Fires involving commercial cooking media such as vegetable oils, animal fats, and grease.
- PASS Technique
- The standard four-step method for using a fire extinguisher: Pull the pin, Aim at the base, Squeeze the lever, and Sweep.
- RACE Protocol
- Emergency response sequence: Rescue anyone in immediate danger, Alarm the facility, Contain the fire, and Extinguish or Evacuate.
- Flashover
- The near-simultaneous ignition of all exposed combustible material in an enclosed space due to thermal radiation.
- Backdraft
- An explosive event occurring when fresh oxygen is suddenly introduced into an oxygen-starved, heat-saturated compartment.
- Means of Egress
- A continuous and unobstructed path of vertical and horizontal travel from any point in a building to a public way.
- Exit Access
- The portion of a means of egress system that leads from any occupied point in a building to an exit.
- Exit Discharge
- The section of a means of egress between the termination of an exit and a public way.
- Fire Door Assembly
- A rated protective barrier comprising door, frame, and hardware designed to resist the spread of fire and smoke.
- Fire Resistance Rating
- The duration in minutes or hours that a building component withstands exposure to a standardized test fire.
- Fire Damper
- A device installed in air distribution ducts that automatically closes to restrict the passage of flame during a fire.
- Smoke Damper
- A mechanical device operated by a smoke sensor designed to resist the flow of smoke within HVAC ductwork.
- Intumescent Coating
- A fire-retardant substance that swells upon heat exposure to create an insulating char layer over structural members.
- Fire Load
- The total amount of heat energy that would be released by the combustion of all fuel present in a defined space.
- Smoke Alarm
- A self-contained device that senses smoke and sounds an audible or visual alarm in the immediate area.
- Photoelectric Smoke Detector
- A detector using light beam obstruction or scattering, highly responsive to slow, smoldering fires.
- Ionization Smoke Detector
- A detector containing radioactive material that senses electrical current changes, optimal for fast-flaming fires.
- Heat Detector
- A sensor triggered by high temperature or rapid temperature increase, commonly used where smoke causes false alarms.
- Manual Pull Station
- A wall-mounted initiation device requiring human action to sound the building's fire alarm system.
- Automatic Sprinkler System
- A network of overhead pipes and heat-activated sprinkler heads that automatically discharges water over a fire.
- Wet Pipe System
- A sprinkler system filled with pressurized water that discharges immediately when a sprinkler head opens.
- Dry Pipe System
- A sprinkler network filled with pressurized air or nitrogen used in freezing environments where water enters upon activation.
- Pre-Action Sprinkler System
- A dry system requiring both a detection event and heat activation before water floods the pipes and sprays.
- Standpipe System
- Piping within a building with hose connection points that provides water supply for manual firefighting operations.
- Fire Department Connection (FDC)
- An external building fitting allowing firefighters to pump supplemental water into sprinkler or standpipe systems.
- Occupant Load
- The total number of persons for which the means of egress of a building or space is legally calculated and approved.
- Emergency Evacuation Plan
- A documented strategy outlining escape routes, assembly points, responsibilities, and procedures during an emergency.
- Assembly Point
- A designated safe outdoor area where building occupants must gather and account for all individuals after evacuation.
- Fire Warden
- An assigned individual responsible for guiding evacuations, inspecting hazards, and accounting for personnel.
- Hot Work Permit
- A formal written authorization required before performing operations involving open flames or sparks, like welding.
- Fire Watch
- Dedicated personnel assigned to continuously monitor an area for fires during hot work or when protection systems are offline.
- Flammable Liquid Storage Cabinet
- A specialized double-walled steel enclosure designed to protect flammable chemicals from external fire exposure.
- Housekeeping in Fire Prevention
- The systematic removal of combustible waste, clear aisle maintenance, and safe chemical storage to reduce fire risk.
- Daisy Chaining
- The unsafe practice of connecting multiple power strips or extension cords together, creating an electrical fire hazard.
- Authority Having Jurisdiction (AHJ)
- The organization, office, or individual responsible for enforcing fire codes and approving fire equipment and procedures.
- Fire Safety Audit
- A comprehensive systematic evaluation of an organization's fire safety measures, policies, and code compliance.
- Notice of Violation
- An official written notification from a fire inspector identifying code infractions that must be corrected within a deadline.
- Stop Work Order
- A legally binding directive issued by an enforcement officer halting construction or operations due to critical fire risks.
- Certificate of Occupancy
- A document issued by local authorities certifying that a building complies with applicable fire and safety codes for use.
- Fire Risk Assessment (FRA)
- A structured review identifying potential fire hazards, people at risk, and the measures necessary to minimize threats.
- Clearance Around Sprinklers
- The mandatory minimum vertical distance, usually 18 to 36 inches, maintained below sprinkler heads to ensure water coverage.
- Emergency Lighting
- Battery-backed lighting devices that illuminate egress paths automatically during power outages.
- Panic Hardware
- A mechanical crash bar on exit doors that allows rapid unlatching and egress without prior knowledge or keys.
- Hydrant Clearance Requirement
- The designated open space, typically three feet around a fire hydrant, required for immediate emergency hose connection.
- Combustible Dust Hazard
- Fine solid particles that suspended in air can ignite rapidly and generate severe secondary explosions.
- Defensible Space
- A buffer zone created by clearing vegetation around a structure to slow wildfire advance and aid firefighting efforts.